SE K800i with R1JG001

something wrong with my k800i since last 9. My default language set to English but didn't know why it display something else that i also don't understand. I tried to set to Chinese and it works fine. So decided to check whether Sony Ericsson got new firmware for K800i or not ...

Yeah it has. Now downloading the latest firmware for SE K800i ~

Yes upgraded from R1GB001 to R1JG001. Done.

Problem solved~

New LV Skin Sticker~

The LV stickers i got before CNY. Tried it on my SE W800i. Yeah it works nice. nice material. Hope i can get bigger size. It is too small to wrap my 838pro. Hopefully can customize order for bigger size~

Debranded My "3" SE K800i ~

Have been reading alot abt how to debrand SE Phones like my "3" logo K800i. Because the branded firmware, I did not able to upgrade the firmware by SEUS. So Decided to give it a try myself.......

Some useful hints :
1)Fully charge your phone using wall charger

2)Do not USB hub - plug the phone straight to the USB port on your PC's motherboard

3)Make sure you set plenty of time for doing this

4)Remove SIM Card and Memory Card from the phone


Abit worry, I killed one of my phones few years ago while i was flashing my panasonic GD88 because of PC crashed~ Ok start PhoneXS~
曾經因為自己不小心flash我的 Panasonic GD88而弄坏了...所以有一點担心.
廢話不多說, 打開 PhoneXS

Select USB cable ~ 選擇 USB

Select the right Firmware (MAIN) , FS, and Custom Pack, and Start~

選擇适合的軟体, FS, Custom Pack, 然后可以開始~

Click FLASH~

start from 11.20am~ let's see how many hrs do i need ~

早上十一多開始. 看看需要几个小時~

waiting... 等待着...

waiting... 等待着...

Still waiting ... 還在等待着...

Yes Finished Brute force. It took abt three hrs~ Done!!

Yahooooo!! 終于完成了! 差不多整3个小時!

Still abit worry after unplugged the phone, have to wait til i start the phone only know the result~ YESSSSSSSSSSSSSS

還是有一點担心. 因為還沒打開手機! 不知道能不能開~ YESSSSSSSSSSSS

WELL DONE~ Local Firmware interface~ 成功了!!!

R1ED001 firmware~ 軟体 R1ED001

The most important is to read , read, and read~ from the following website!!

1) http://forums.se-nse.net/

2) http://www.topsony.com/

And I wanna thanks the moderator of SE-NSE "Lemming"! Yes Thanks you very much for sharing all the information.

"THREE" SE K800i~

Got the branded "3" SE K800i sim-unlocked tonight~
It shows "Start VideoPhone" while start up!
Unlike Local Set only show "Start Phone"~
今晚買了一台有3logo的K800~ 和本地的大同小異~

The Housing of both phones are the same, except the front logo~ One is "3", Local AP set is "CyberShot". I prefer the local AP set. Don't really like the 3 logo!
這一台有3logo的K800是囯外的~ 而本地的是印有"CyberShot"的~

Even the display icons are all different~ It seems like the "3" set is abit slower~
3 logo的K800电話里的icon和本地的是完全不同! 3 logo的感覺比較慢~

Used DavinciFlasher to compare the local AP set and "3"~ Only the phone CID is different.

[教學]SE K800i 電子郵件的設定

首先你得要有一個支援 POP3的帳號，及3G門號，最好有辦吃到飽服務

以威寶3G + GMail 設定為例

<目錄 > =<訊息>=<電子郵件>=<設定>
帳號名稱 : Gmail (自定)
電子郵件提示 : 此為提示聲(自定)
連結帳號 : VIBO WAP (設定Wap or 從行動網路都可以，但費率怎麼算???? 這部份不清楚)
電子郵件位址 : UserName@gmail.com (您的E-Mail Address)
連結類型 : POP3
內送伺服器 : pop.gmail.com
使用者名稱 : UserName (通常為E-Mail Address @小老鼠前面的ID)
密碼 : ******** (就是密碼)
外寄伺服器 : smtp.gmail.com

選<進階設定>

寄件者 : UserName (自定)
簽名 : ^o^ (自定,可使用手機內建表情符號)
下載傳送及接收 : 按大小限制 (可自行依照您的費率設定，吃到飽的用戶可以設定大一點)
檢查的頻率 : 關閉 ~5分鐘~12小時 (自定)
推送電子郵件 : (不支援)
許可連結 : 主網 (選主網即可，若是選任何網路不知道會不會產生其他不必要的費率)
復制外寄郵件: 關閉
加密 : 內送伺服器 與 外寄伺服器 階選 SSL
外寄使用者名稱 : UserName (這邊要再設一次帳號密碼，外寄伺服器認證用)
外寄使用者密碼 : ******** (這邊要再設一次帳號密碼，外寄伺服器認證用)
內送連結port : 995 (選SSL會自動設995)
外寄port : 465 (外寄加密選SSL這邊會自動設465)

設定好之後，退出上層，選<傳送接收> 享受行動E-Mail的便利吧 ^^

SE W800i Firmware Upgraded~

firmware was R1AA008 since i bought the phone~

Double click the w800 exe file ~ input all the information needed then ..............

SEUS checking for the headset ~

Yes SEUS confirm it is original SE W800i ~ :) :) :) :P

Downloading the latest firmware from SE ~

Upgrading the firmware ~ YESSSSSSSSSSSSSSSSSSSS

Done~ Yahooooooooooo :P :P :P

Now my SE W800i firmware is R1BC002

YES~ Done Fooling SEUS. Yahoooooooooooooooo

0) charge battery (20% is not enough)

1) remove battery

2) remove SIM card

3) insert battery

4) PC: Double-click "W800_new.exe"

4) MAC: execute "W800"

5) hold the "C" *on the phone* and connect phone to PC using DCU60 (service cable that came with phone)

6) release the "C" button on the phone

7) you see either lots of errors -> your phone is new and not CID36. There is no support for CID49 phones at the moment.

7) you see a configuration menu

8) default IMEI is for W800

( I'm trying to do it on my W800i with wrong CDA, so no need to change IMEI)

8) you can change the IMEI to match a K750 if you want to flash K750 firmware

8) in that case you can change IMEI with "I......". you will need a K750-CDA number!

9) default CDA is for EUROPE2

9) look up the correct W800-CDA number for your region/language/operator (see links below)

9) change the CDA number by entering "CDA....."

( I changed mine from CDA102239/43 to CDA102430/101 - Generic Singapore / Malaysia / Indonesia / Philipines / Vietnam )

10) if configuration looks okay, hit "Q"

11) unplug the phone, quit W800.exe

12) dont touch the phone, leave battery inserted

13) start SEUS

14) SEUS -> start -> accept EULA -> select left port

15) do not remove battery

16) connect phone to PC

17) SEUS will detect W800 and region

18) if detection is okay (W800 + region), click "update", point of no return

18) if detection is not okay, hit "cancel" , quit SEUS, remove battery, wait, reinsert battery, repeat procedure

19) after flashing, unplug phone, remove battery, wait, reinsert battery

20) start phone

21) you should see flightmode/phonemode menu now

My SE W800i firmware was R1AA008. Finally got it upgraded to R1BC002 by SEUS online for FREE~ YESSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSss~ ~

Thank you so much to http://forums.se-nse.net.

All information from http://forums.se-nse.net 's hendrix moderator fr Germany~

CID and CDA of Sony Ericsson~

SETOOL2

Davinciteam Client Logger 17.35

Have been reading over the weekend~ wanna know how to edit the CDA of my W800i in order to upgrade the firmware. Gathered alot of information fr internet. Found out my W800i CID is not belong to Malaysia, that's why I was not able to upgrade the damn firmware ....

actual information fr se-nse.net and club.ccmove.com's lsj1328

Explaination of CID :

CID 是 Customer IDentity 的简称,简单来说就是手机的平台版本. CID紧跟IMEI存储在手机的OTP(One Time Programmable)芯片中. CID 后面的数字代表的是索爱手机软件保护版本号,新的CID不断被使用,以用来防止手机被非索爱官方的维修程序拿来解锁/刷机/篡改. 目前索爱使用的CID有29/36/37/49四种. 基于索爱技术的LG/Sharp 手机也使用相同的系统(但是版本不同,即CID号码不同,如CID 37). 同一型号的手机其CID也不完全相同,比如K750就有CID36和CID49两种 CID49 目前是最新的CID版本,其存在于索爱的 K608, W500, W550, W600, W810, W900 以及新版的K750/W800中. CID36 是CID49之前的版本,存在于 J300, K300, K608, K600, Z800, K750, W800, Z520中. CID29 是CID36之前的版本,存在于 K500, K700, S700, V800中 目前,免费的刷机工具只能被用来刷CID36以及更低的版本。

Explaination of CDA :

CDA 号是标识手机销售地区的，又称硬件识别号，类似CD盒上的“只限大陆地区发行”，是写在手机内部的一个信息，索爱用它来识别手机的销售地区。比如在线升级，现在很多出售的水货K750都是刷了软件，但是没改CDA号的，也就是说CDA号还是它原来所在销售地区的，那么索爱的官方网站就会把它识别成其他国家的版本，这样升级过后手机又变成了其他语言的版本，不是之前的中文了，也就是说，现在购买水货的K750如果不是改过CDA号的就不能在线升级。同样，如果水货的手机没有刷中文软件，但是被改了大陆地区的CDA号，那么在线升级之后，手机软件会直接升级成中文。注意：现在CDA是可以通过刷机软件任意修改的，也就是说不能完全通过查看CDA来判断手机是不是水货。

finally understand what shd I do but still not able to download all the files i need to do so~ :(

如何验证CID的问题，可以通过Davinciteam Client 16.4这个软件来验证。

具体方法如下：

打开程序，点击程序右下部的READ CID/Test Cable ，

该按钮会变为 STOP

此时在左边窗口中显示 ：

**** READING CID STARTED ****Turn off the phone. <关闭手机>

Hold "C" button and plug USB cable <按C键插入USB数据线>(当发现手机你就可以释放C键)

此时，按住手机的C键不放同时插入USB 数据线，

软件对手机进行检测工程机及零售机：

Color后面英文为RED，即零售版。

如为BROWN即工程版零售版可以通过原装数据线升级，工程版要用到专门的刷机数据线升级或将RED改为COLOR检测完后。

关掉程序，把USB线拔下来即可

Step by Step (Chinese) : ~

下载下面的文件，把文件解压

把 cygwin1.dll 复制到 windows目录下 system 目录里

运行 w800.exe

关机，按住 C 键插入数据线

等一下

输入 I35682800672952（注意，这里的I是大写）

按enter

输入 CDA102425/3

按enter

输入 q

按enter

拔除数据线

这时不要开机，也不要拔出电池

然后按在线升级的方法升级就可以升为w800，但手机型号显示还是显示原来的型号

适用范围：

W800(CDA码错误)、 K750、 D750、 K758，且此方法只适用于 cid36 red 的机型。

这个软件不会向手机写入任何东西，只是骗过索爱的服务器，以为是w800运行软件前要先安装好usb驱动

Step by Step (English) : ~

0) charge battery (20% is not enough)

1) remove battery

2) remove SIM card

3) insert battery

4) PC: Double-click "W800_new.exe"

4) MAC: execute "W800"

5) hold the "C" *on the phone* and connect phone to PC using DCU60 (service cable that came with phone)

6) release the "C" button on the phone

7) you see either lots of errors -> your phone is new and not CID36. There is no support for CID49 phones at the moment.7) you see a configuration menu

8) default IMEI is for W800

8) you can change the IMEI to match a K750 if you want to flash K750 firmware

8) in that case you can change IMEI with "I......". you will need a K750-CDA number!

9) default CDA is for EUROPE2

9) look up the correct W800-CDA number for your region/language/operator (see links below)

9) change the CDA number by entering "CDA....."

10) if configuration looks okay, hit "Q"

11) unplug the phone, quit W800.exe

12) dont touch the phone, leave battery inserted

13) start SEUS

14) SEUS -> start -> accept EULA -> select left port

15) do not remove battery

16) connect phone to PC

17) SEUS will detect W800 and region

18) if detection is okay (W800 + region), click "update", point of no return

18) if detection is not okay, hit "cancel" , quit SEUS, remove battery, wait, reinsert battery, repeat procedure

19) after flashing, unplug phone, remove battery, wait, reinsert battery

20) start phone

21) you should see flightmode/phonemode menu nowGet your CDA strings for correct language files from:http://www.se-world.info/cda-strings.phpMore complete list: (thx to Rulv for link)

http://www.topsony.com/foro/cmps_index.php?page=CDA_w800

What this procedure does not do:------------------------------------------

- change the IMEI

- change hardware identification to W800

- upload W800 themes/sounds/games

So it is always possible to revert to K750 via SEUS: simply do not use W800.exe. Just connect to SEUS and old configuration will be restored.

Edit: works with long CDA numbers now.

Edit: you can edit the CID number now. Note that prepping works only with phones up to CID36.

Edit: rewrote instructions. failsafe now?

Edit: released source code for payload for you. It is written in C.

Edit: released source code for elfloader. It is written in C.

Edit: new release. all in one .zip. Updated the Makefile for payload.elf and the elfloader.c.

Edit: new elfloader can handle raw bin files: 'BINN'

Edit: updated W800_new.exe will work without cygwin1.dllEdit: updated the link to TopSony's CDA-list

information from zidanejay of club.ccmove.com

W800要想升级你的W800首先确认一下手机的CDA号，也就是索爱手机的硬件识别号，

在线升级系统就是通过手机的CDA号来识别需要升级到什么版本，

然后下载相应版本并升级，如果手机的CDA号是国外版本的话，

那么在线升级后将不支持中文，所以首先需要确认一下手机的CDA号。

查看CDA号的方法是输入以下指令“右*左左*左*”，

进入服务菜单选择软件信息即可查看手机的CDA号。

目前市面上经常见到的CDA号为：

CDA 102425/3、CDA 102425/3 R6A、CDA 102338/36 R5A、CDA102425/5，

其中CDA 102425/3和CDA 102425/3 R6A可以使用在线升级的方法升级到最新版本，

而其他的CDA号版本升级后将失去中文支持，并且拍摄功能失效，请大家务必升级前检查好手机的CDA号。

现将W800的CDA号和产地对应列表如下：

CDA102425/3 中国

CDA102425/7 中国TAIWAN索爱

CDA102425/15 香港

CDA102425/25 巴西索爱

CDA102425/33 委内瑞拉

CDA102425/36 德国

CDA102430/105 阿根廷、拉丁美洲

CDA102425/40R1A 澳大利亚

CDA102425/4 比利时

CDA102430/14 智利

CDA102430/2 捷克斯洛伐克

CDA102425/16 法国

CDA102430/10 南非索爱

CDA102430/101 印度尼西亚

CDA102430/6 印度、阿拉伯联合酋长国、

CDA102430/4 匈牙利索爱

CDA102425/39 希腊

CDA102425/5 意大利索爱

CDA102430/1 波兰索爱

CDA102430/9 葡萄牙索爱

CDA102430/13 瑞士

CDA102425/38 俄国索爱

CDA102425/23 西班牙

CDA102430/12 瑞典、芬兰、丹麦、挪威索爱

CDA102430/102 泰国

CDA102425/37 土耳其索爱

CDA102425/6 英国

CDA102425/55 美国

CDA102425/47 荷兰索爱

CDA102425/8 奥地利

CDA102425/9 英国02公司定制

CDA102425/32 澳大利亚OPTUS公司定制

CDA102425/46 荷兰PRANGE公司定制

CDA102425/22 瑞士PRANGE公司定制

CDA102425/10 英国PRANGE公司定制

CDA102425/42 新加坡SINGTEL MOBILE定制

CDA102425/21 奥地利SUNRISE公司定制

CDA102425/61 墨西哥TELEFONICA公司定制

CDA102425/31 澳大利亚TELSTRA公司定制

CDA102425/20 巴西TIM公司定制

CDA102425/66 奥地利T-MOBILE公司定制

CDA102425/43 英国T-MOBILE公司定制

CDA102425/19 南非沃达丰定制

CDA102425/14 德国沃达丰定制

CDA102425/35 瑞典沃达丰定制

CDA102425/13 英国沃达丰定制

CDA102430/106 R16A美国

CDA102430/11 欧洲

CDA102430/12 欧洲

CDA102430/13 R2A 欧洲

CDA102430/9 欧洲

CDA102430/101 - Generic Singapore / Malaysia / Indonesia / Philipines / Vietnam

Upgraded My SE K800i ~

Don't know what's wrong with my W800i~ Have been trying to upgrade the firmware but failed. Then found out last 9 K800i got new firmware again.Just now upgrade from R1ED001 to R1GB001 ~

Upgraded SE K800 Firmware ~

start and choose the model ~

Downloading the software ...

Upgrading firmware ...

DONE ~

My SE K800i with R1CB001 firmware doesn't show CALLER ID on my Itech Clip D. Upgraded from R1CB001 to R1ED001. Now it works fine with my Clip D.....

Guess have to wait til 838pro got new ROM only know whether it works or not. Currently ROM still don't work with Clip D ~ :( too bad ......